|
|
Orifice Plates Water Flow Meter |
Orifice Plates Water Flow Meter is an ace product from our side. These products from our side are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity. This one is efficient enough to provide an acceptable level of uncertainties at superior performance and low maintenance without regular follow-ups.
Features:
Correct flow measurement
Accurate results
Easy to maintain
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm
|
|
|
|
|
Orifice Plate Meter |
Product Details:
Minimum Order Quantity 1 Piece
Brand Flowtech
Display Digital
Orifice Plate Meter gives an acceptable level of uncertainties at lowest cost and long life without regular maintenance. These products from our side are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Features:
Flow measurement
Perfect results
Simple to maintain
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Plate Design Calculation |
Product Details:
Size 2 inch, 3 inch, 2 TO 30 inch
Brand FLOWTECH
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Flange Assemblies |
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Flange Assembly |
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Plate Flange Assembly |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plate Sizing |
Applications:
Scientific laboratory
Research centers
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Flange Assemblies |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
Description:
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
'Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake Orifice Flange Assemblies are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenance. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
Accuracy- Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Installation Orifice Plate |
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Plates And Flange Assemblies |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
|
|
|
|
|
Orifice Plates |
Product Details:
Minimum Order Quantity 1 Piece
Size 2 inch, 3 inch
Brand FLOWTECH
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Plates Sizing |
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Assly |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Flange |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Restricted Orifice Plate |
Product Details:
Minimum Order Quantity 1 Piece
Size 2 inch, 3 inch, 2 TO 30 INCH
Brand FLOWTECH
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042.
|
|
|
|
|
Segmental Orifice Plate |
Product Details:
Minimum Order Quantity 1 Piece
Size 2 inch, 3 inch
Brand FLOWTECH
Description:
Flowtech"Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042" ""
FOWTECH"make"ORIFICE FLANGE ASSEMBLIES"are used for measuring flow of various Liquids, Gases & Steam from 1 ½”"to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for"" Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Flow Meter Orifice Plate |
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
Display Analog
|
|
|
|
|
Flow Measurement Orifice Plate |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 5-10 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105
Description:
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
Flowtech make Orifice flange assemblies are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Flanges Assembly |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Type Flow Meter |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Display Analog
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Assembly |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material Standard ASTM A105, ANSI B16.5
Description:
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make Orifice Flange Assembly are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances.
Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards:
Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
Orifice Bore - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
Accuracy - Within /- 1 %
Vent / Drain - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plate |
Product Details:
Size 2 inch, 3 inch, 3 inch, 2 TO 30 INCH, 2 TO 30 INCH
Brand FLOWTECH, FLOWTECH
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Multiple Orifice Plate |
Product Details:
Minimum Order Quantity 1 Piece
Size 2 inch, 3 inch
Brand FLOWTECH
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plate Flow Meters |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH, FLOWTECH
Display Analog
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifices Assembly |
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Flange Union |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH, FLOWTECH
Size 1-5 inch, 5-10 inch, 10-20 inch
Material Standard ANSI B16.5, ANSI B16.5
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Flow Meter |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Display Analog
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plate Flange |
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plate Flow Meter |
Product Details:
Minimum Order Quantity 1 Piece
Material SS
Brand FLOWTECH, FLOWTECH
Display Analog
Description :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
Fowtech Make Orifice Flange Assemblies Are Used For Measuring Flow Of Various Liquids, Gases & Steam From
1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifices Plates |
Applications:
Scientific laboratory
Research centres
Chemical industries
Specifications:
Available in SS-316/P.P. Material
1 ½” to 24” line sizes
Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
Accuracy - within /- 1 %
Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm
|
|
|
|
|
Orifice Plates And Flange Assembles |
Design Standards:
Design- Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
Accuracy - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plates And Flanges Assemblies |
FOWTECHmake Orifice Plates and Flange Assemblies are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards:
Design- Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
Accuracy - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Orifice Plates And Flange Assembly |
Product Details:
Size 2 inch, 3 inch
Brand FLOWTECH
Flowtech make Orifice Plates and Flange Assembly are used for measuring flow of various Liquids, Gases & Steam from 1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/ P.P. Material.
Design standard confirm to BS 1042
Design Standards
Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
Orifice Bo re - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
Accuracy - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
Tank Mounted View Glass |
Product Details:
Brand Flowtech
Usage Industrial, Domestic
Specifications:
Size : 50 to 600 NB.
Round, Square & Rectangular Shape.
MOC : CS, SS-304, SS-316.
|
|
|
|
|
Wnrf Orifice Type Flow Meters |
Product Details:
Minimum Order Quantity 1 Piece
Brand FLOWTECH
Display Analog
DESCRIPTION :
Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.
Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
Available in SS-316/P.P.Material.
Design standard confirm to BS 1042
FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from
1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.
Design Standards
DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
ACCURACY - Within /- 1 %
VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
|
|
|
|
|
|
|
|
|